COMPUTATIONAL & EXPERIMENTAL MECHANICS
Dept. of Mechanical & Materials Engineering Universiti Kebangsaan Malaysia |
||||
|
MACM | IACM |
||||
|
Publications |
1 A strain gauge based system
for measuring dynamic loading on a rotating shaft, M. Hilal
Muftah and S. Mohamed Haris, 2011, International
Journal of Mechanics. 2 Analysis
of Asphalt Pavement under Nonuniform Tire-pavement
Contact Stress using Finite Element Method M.H.
Nahi, A. Ismail & A.K. Ariffin, 2011, Journal of Applied Sciences. 3 Characterizations
of CU-based coated AL7075 via plasma-spray method - a wear case study, M. J.
Ghazali, S. E. Mat Kamal, S. Abdullah and H. Misran, 2011, International Journal of Nanoscience. 4 Design
Assessment for Reusability of an Automotive Safety Beam, A.A. Lashlem, Dzuraidah Abd Wahab, Shahrum Abdullah and Che
Hassan Che Haron, 2011, Australian Journal of Basic and Applied Sciences. 5 Development
of Artificial Neural Network for Optimization of Reusability in Automotive
Components, Mohamad Ariff Shah Mohamed Nazmi, Dzuraidah Abd Wahab, Shahrum Abdullah and Razali
Mohd Tihth, 2011,,Journal of Applied Sciences 6 Effect
of the fatigue data editing technique associated with finite element analysis
on the component fatigue design period, Kadhim N.A., Abdullah S., Ariffin A.K, 2011, Materials
and Design. 7 Emission
Analysis of a Compressed Natural Gas Direct-Injection Engine with a
Homogenous Mixture, S. Abdullah, W.H. Kurniawan, M.
Khamas And Y. Ali, 2011, International Journal of Automotive Technology. 8 Data
Scattering of fatigue damaging segmentation in order to develop the fatigue
damaging and morlet wavelet coefficient relationship,T.E. Putra, S. Abdullah, M. Z. Nuawi, 2011, International
Review of Mechanical Engineering. 9 Evaluating
charpy impact signals using power spectrum
densities: A finite element method approach, Ali,
M.B., Abdullah, S., Nuawi, M.Z., Ariffin, A.K., Mohammad, M.,2011, International
Journal of Mechanical and Materials Engineering. 10 Extracted
fatigue damaging events using the morlet
wavelet-based algorithm, Putra T.E., Abdullah S., Nuawi M.Z., Nopiah Z.M.,
Abdullah L., Arifin A.K, 2011, Transactions
Hong Kong Institution of Engineers. 11 Fatigue
life modelling under constant amplitude loading
using adaptive neuro - fuzzy (ANFIS) application, Abdul
Razzaq M., Ariffin A.K., Al-Shafie
A., Abdullah S., Sajuri Z., Kadhim N.A., 2011, Australian
Journal of Basic and Applied Sciences. 12 Fatigue
Life Reliability Prediction of a Stub Axle using Monte Carlo Simulation, Y.M.
Asri, E.A. Azrulhisham,
A.W. Dzuraidah, A. Shahrir, A. Shahrum and Z. Azami, 2011, International Journal of Automotive Technology. 13 Stress
intensity factors for surface cracks in round bar under single and combine
loading, A. E. Ismail, A. K. Ariffin, S. Abdullah and M. J. Ghazali, 2011, Meccanica,
Springerlink 14 Experimental
analysis of an instrumented charphy impact using
statistical study based data analysis, M. B. Ali, S. Abdullah, M. Z. Nuawi,
M. M. Padzi and K. A. Zakaria, 2011, International
Journal of Mechanical and Materials Engineering (IJMME) 15 Injection
Molding Parameter Optimization of Titanium Alloy Powder Mix with Palm Stearin
and Polyethylene for Multiple Performance Using Grey Relational Analysis, N.H. Mohamad Nor, N. Muhamad,
A.K. Ariffin, M. Ruzi, K.R. Jamaludin and A. Sufizar, 2011, Journal of Applied Sciences. 16 Lattice
Boltzmann Simulation of Cavity Flows at Various Reynolds Numbers, M.A. Mussa, S. Abdullah, C.S. Nor Azwadi,
R. Zulkifli, 2011, International Review on Modelling
and Simulations. 17 Evaluation
of Fatigue Life Reliability of Steering Knuckle Using Pearson Parametric DistributionModel, E. A. Azrulhisham,
Y. M. Asri, A.W. Dzuraidah, N.M. Nik Abdullah, A.
Shahrum, andC. H. CheHassan,
2011, International Journal of Quality, Statistics, and Reliability. 18 Off-set
crack propagation analysis under mixed mode loadings, A. E. Ismail, A. K.
Ariffin, S. Abdullah and M. J. Ghazali, 2011, International Journal of
Automotive Technology. 19 Powder
material parameters establishment through warm forming route, M.M. Rahman,
A.K. Ariffin, S.S.M. Nor & H.Y. Rahman, 2011, Materials and Design. 20 Probabilistic
high cycle multiaxial fatigue analysis using finite
element method, Ismail A.E., Ariffin A.K., Abdullah S., Ghazali M.J., 2011, Transactions
Hong Kong Institution of Engineers 21 Genetically
optimised disassembly sequence for automotive
component reuse, T.F. Go, D.A. Wahab, M.N.Ab.
Rahman, R. Ramli, A. Hussain, 2011,Expert Systems with Applications. 22 The
transition from homogeneous flow to fracture in metallic glasses at
high-homologous temperatures, P. Thamburaja and N.
Nik Abdullah, 2011, Scripta Materialia. 23 Slip
MHD liquid flow and heat transfer over non-linear permeable stretching surface
with chemical reaction, M.H.
Yazdi, S. Abdullah, I. Hashim, K. Sopian, 2011,International
Journal of Heat and Mass Transfer. 24 Simulation
of natural convection heat transfer in an enclosure by the lattice-Boltzmann
method, M.A. Mussa, S. Abdullah, C.S. Nor Azwadi, N. Muhamad, 2011, Computer and Fluid 25 Kesan
lapisan berliang dan nisbah keluasan plat berlubang terhadap cirri akustik
serabut sabut kelapa sebagai bahan penyerap bunyi, Zulkarnain,
Rozli Zulkifli & Mohd Jailani Mohd Nor, 2011, Sains Malaysiana 26 The
Use of Morlet Wavelet Coefficients for Identifying
Fatigue Damage Features, S. Abdullah, T. E. Putra, M. Z. Nuawi and Z. M.
Nopiah, 2011, Pertanika
J. Sci. & Technol 27 Effects
of Viscous Dissipation on the Slip MHD Flow and Heat Transfer past a
Permeable Surface with Convective Boundary Conditions, Mohammad H. Yazdi, Shahrir Abdullah, Ishak Hashim and Kamaruzzaman
Sopian, 2011, Energies. 28 Microstructure
and mechanical properties of magnesium composites prepared by spark plasma
sintering technology, Wan Nur Azrina Wan Muhammad,
Zainuddin Sajuri, Yoshiharu Mutoh, Yukio Miyashita, 2011, Journal of Alloys
and Compounds. 29 Drop
weight impact response of woven natural silk/epoxy laminated composite plates,
A.U. Ude,
A.K. Ariffin, A.A. lashlem and C.H. Azhari, 2011, Australian
Journal Of Basic and Applied Sciences 30 Evaluation
of seat vibration sources in driving condition using spectral analysis, Mohammad
Hosseini Fouladi, Mohd. Jailani Mohd. Nor, Othman Inyatullah, Ahmad Kamal, 2011, Journal of Engineering
Science and Technology.
|
|||
