Seminar
Senarai seminar/persidangan anjuran/anjuran bersama oleh CAR
| TAJUK SEMINAR/PERSIDANGAN | TARIKH/TEMPAT | PENCERAMAH |
|---|---|---|
| The Importance and Latest Development of Crash Safety Engineering | 26 Mei 2017, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • En. Mohd Syazwan Solah • En. Azhar Hamzah Malaysian Institute of Road Safety Research (MIROS) |
| Design and Development of a Simulation Environment and a Fault Isolation Scheme on A Volvo VEP4 MP Engine | 16 November 2016, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Dr. Mark Ng, Electrical and Computer Systems Engineering, School of Engineering, Monash University of Malaysia |
| Symposium on Damage Mechanisms in Materials and Structures (SDMMS) | 9 Ogos 2016, Bangi Hotel | • Prof. Akiyuki Takahashi, Tokyo University of Science, Japan • Ir. Dr. Ezzarhan Abdullah, Department of Occupational Safety and Health, Malaysia |
| Invited Lecture Series: Lectures on Energy Systems and Drivetrains | 4 Disember 2015, Bilik Reka Bentuk JKMB, FKAB | • Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany) |
| 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR) 2015 | 1-3 Disember 2015, Holiday Inn Hotel, Melaka | • Prof. Mingcong Deng (Tokyo University of Agriculture & Technology, Japan) • Dato' Sri Syed Zainal Abidin Syed Mohamed Tahir (CMS Consortium Sdn Bhd - COMOS, Malaysia) • Dr. Lin Xiaobin (HBM-nCode, Shanghai Division, China) • Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany)) • Mr. Masaharu Ohya (RION Co. Ltd. Japan) • Mr. Dieter Lim (VTC Solution Sdn Bhd, Malaysia) |
| 5th International Conference on Noise, Vibration & Comfort (NVC) 2015 | 1-3 Disember 2015, Holiday Inn Hotel, Melaka | • Prof. Mingcong Deng (Tokyo University of Agriculture & Technology, Japan) • Dato' Sri Syed Zainal Abidin Syed Mohamed Tahir (CMS Consortium Sdn Bhd - COMOS, Malaysia) • Dr. Lin Xiaobin (HBM-nCode, Shanghai Division, China) • Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany)) • Mr. Masaharu Ohya (RION Co. Ltd. Japan) • Mr. Dieter Lim (VTC Solution Sdn Bhd, Malaysia) |
| Invited Talk: Cooperative Research of Universities and Industries in Germany | 30 November 2015, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Dr.–Ing Tobias Bruckmann (Chair of Mechatronics, University of Duisburg-‐Essen) |
| Automotive Forum: Success Factors for R&D Project Commercialization | 18 Februari 2015, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Prof. Ir. Dr. Mohd Jailani Mohd Nor, Deputy Vice Chancellor (Research & Innovation), Universiti Teknikal Malaysia Melaka (UTeM) |
| Technical Forum: Valeo Innovation Challenge | 21 Januari 2015, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • En. Jurin Memungtham ASEAN HR Director • Mr. Wan Adnan Wan Ramlan, Business Dev Manager, Malaysia |
| Automotive Seminar - New Car Assessment Program (NCAP), | 9 Jun 2014, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • En.. Badruzzaman Abd. Rahman, Crash-Safety team, Perushaan Otomobil Nasional Berhad (PROTON) |
| Seminar on Efficient Concept Generation & Optimization Technology in Automotive & Design Engineering World | 2 Jun 2014, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • En.. Khairulnizam Ruslan, ORS Technologies Snd Bhd • Ms. Sharifah Zawanah Syed Ibrahim, ORS Technologies Snd Bhd • Mr. Sharoul Jambari, RTG Intech |
| Invited Talk on Vehicles Dynamics: Transient and Steady-State Vehicles Dynamics | 19 Disember 2013, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Professor Reza N. Jazar, RMIT Australia |
| 2th International Conference in Automotive Engineering and Mobility Research (ReCAR) 2013 | 16-18 Disember 2013, Hotel Furama, Kuala Lumpur | • Professor Reza N. Jazar, RMIT Australia • Dr. Norlen Mohamed, Vehicle Safety and Biomechanics Research Centre, Malaysian Institute of Road Safety Research (MIROS) • Professor Dato’ Ir. Dr. Wan Ramli Wan Daud, Fuel Cell Institute, Universiti Kebangsaan Malaysia • Associate Professor Dr. Talal Yusaf, University of Southern Queensland, Australia |
| 4th International Conference on Noise, Vibration and Comfort (ICNVC2012) | 26-28 November 2012, Hotel Melia, Kuala Lumpur, Malaysia | • Professor Masanori Kikuchi, Tokyo University of Science • Ir. Haji Tajul Zahari Abu Bakar, Perushaan Otomobil Nasional Berhad (PROTON), Malaysia • Prof. Dr. David Thompson, ISVR, University of Southampton • Prof. Ir. Dr. Benjamin Soenarko, Faculty of Engineering, Maranatha Christian University |
| Seminar on Importance of Machinery And Engineering Components In A Competitive Economy | 1 November 2012, Dewan Utama, Pusat Pengugusan Siswazah, UKM | • Mr. Alhardy Ismail, Standards Research and Management Centre, SIRIM Berhad • Ms. Nor Hashimah Ismail, Standards Research and Management Centre, SIRIM Berhad • Ir. Luk Chau Beng, Chairman of Technical Committee on Machinery and Components • Mr. Chua Lee Boon, Technical Committee on Machinery and Components • Mr. Aminuddin Ghazali, Technical Committee on Machinery and Components |
| Thermofluids Research Group Seminar | 8-9 Februari 2012, Hotel Equatorial, Bangi | • Prof. Ir. Dr. Shahrir Abdullah, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia • Assoc. Prof. Dr. Rozli Zulkifli, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia |
| Invited Talk on " Mechatronic Applications: A Lab Tour" | 16 Disember 2011, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Dr. -Ing. Tobias Bruckmann, Universtiy Duisburg-Essen, Germany |
| Regional Conference on Automotive Research (ReCAR2011) | 14-15 Disember 2011, Hotel Royale Bintang, Kuala Lumpur, Malaysia | • En. Sharoul Jambari, Head of Division - Capacity Building, Malaysia Automotive Institute (MAI) • Mr. Muhammad Aris Anuar, Head of Manufacturing, PROTON • Prof. Ir. Dr. Shahrir Abdullah, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia • Prof. Dr. Ir. Benjamin Soenarko, Maranatha Christian University, Indonesia • Prof. Dr.-Ing. Dieter Schramm, University Duisburg-Essen, Germany |
| Courses/Seminar on Theory and Training of Modefrontier Software : Design Optimization Theory | 13 April 2011, Dewan Persidangan CRIM, Universiti Kebangsaan Malaysia | • En. Dieter Lim, VTC Solution Sdn Bhd • Dr. Waleed Fekry Faris, International Islamic University of Malaysia (IIUM) |
| Industrial Seminar: R&D in CFD Tools: MSC.Software University Program | 25 Januari 2011, Bilik Reka Bentuk JKMB, Universiti Kebangsaan Malaysia | • En. Ir. Abdul Malik, Automated Design Express Sdn Bhd |
| Invited Talk on Engineering Research: Overview on Fracture of Piezoelectric Materials | 17 Januari 2011, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Professor Dr. Tong-Yi Zhang, Hong Kong University of Science and Technology (HKUST), Hong Kong, China |
| Industrial Seminar" The Extent of FEA Revolution Technology Towards Mechanical Engineering Design | 13 Januari 2011, Bilik Reka Bentuk JKMB, UKM | • En. C. J. Quah, NUMIT Exterprise |
| Seminar on Damage and Fracture Processes in Engineering Materials: Modelling Aspects | 8 Oktober 2010, Bilik Mesyuarat Fakulti Kejuruteraan dan Alam Bina, UKM | • Prof. Dr. Mohd Nasir Tamin, Universiti Teknologi Malaysia (UTM). |
| The 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010 | 28-30 Jun 2010, Hotel Pullman, Putrajaya | • Professor Dr.-Ing Klaus Genuit, Acoutics GmbH (Germany) • Professor Dr. Samir Nagi Yousri Gerges, Federal University of Santa Catarina (Brazil) • Professor Dr. M.L. Munjal, Indian Insitute of Science (India) • Dr. Slaheddine Frikha, Innovation and Advanced Project, ESI Group (France) • Mr. Harry K. Zaveri, Brule & Kjaer (Denmark) |
| Intensive Course of Electronic Control Unit (ECU) in Automotive Engine | 22-23 Februari 2010, Makmal Komputer CAD/CAM, JKMB, UKM | • Dr. Asep Rukmaya, Institut Teknologi Bandung, Indonesia |
| Seminar on Electronic Control Unit (ECU) for Automotive Engine | 17 Februari 2010, Bilik Majlis, Bangunan Canselori, UKM | Prof. Madya Dr. Ishak Haris, Institut Teknologi Maju, Universiti Putra Malaysia • En. Mohd Khair Hassan, Institut Teknologi Maju, Universiti Putra Malaysia |
| Industry Product Seminar: Yasuda Seiki Product - Testing Machine | 18 Oktober 2010, Bilik Reka Bentuk JKMB, UKM | • En. Hj. Khairil A. Yacub, KL Analytical Sdn Bhd • Mr Hedi San of Yasuda, KL Analytical Sdn Bhd |
| Engine Measurement and Research Seminar (EMARS 2009) | 29 Mei 2009, Dewan Persidangan CRIM, UKM | • En. Prabhaker Balakrishnan, Kistler Instrument Pte Ltd (Singapore) • Mr. Marshall Kuno, Kistler Instrument Pte Ltd (Singapore) • Prof. Ir. Dr. Yusoff Ali, Faculty of Engineering and Built Environment (UKM) |
| Instrumentation and Diagnostic Measurement on Engine Testing Seminar (IDMETS 2008) | 02 Julai 2008, Hotel Marriott, Putrajaya | • Engineer Andreas Kieslinger, Dewetron Pte Ltd (Singapore) • Engineer Kuno Marshall, Kistler Instrument Pte Ltd (Singapore) • Mr. Ivan Tan, IPSH Gasmaster Sdn Bhd (Malaysia) • Mr. Harold Hochstadt, Orbital Engine Company (Australia) • Dr. Mike Khoo Yong Chuan, TSI Asia-Pasific Incorporated (Singapore) • Mr. Yap Haw Shin, VTC Solution Sdn Bhd (Malaysia) • Prof. Ir. Dr. Yusoff Ali, Faculty of Engineering and Built Environment (UKM) |