Penerbitan Tahun 2013

1. A. Almaslow, M.J. Ghazali, R.J. Talib, C.T. Ratnam, C.H. Azhari, 2013, Effects of epoxidized natural rubber-alumina nanoparticles (ENRAN) composites in semi-metallic brake friction materials, Wear, 302(2013): 1392–1396.
2. A.A. Lashlem, D.A. Wahab, S. Abdullah and C.H. Che Haron, 2013, A Review on End Life Vehicle Design Process and Management, Journal of Applid Science, 13(5): 654-662.
3. A.N.M. Rose, B. Md. Deros and M.N. Ab. Rahman, 2013, Lean manufacturing perceptions and actual practice among Malaysian SME`s in automotive industry, International Journal of Automotive & Mechanical Engineering, 7: 820-829.
4. A.U. Ude, A.K. Ariffin, C.H. Azhari, 2013, Impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials, International Journal of Impact Engineering , 58 (2013) 31-38.
5. Ali Ghadianlou, Shahrir Abdullah, 2013, Crashworthiness design of vehicle side door beams under low-speed pole side impacts Thin-Walled Structures, 67(2013): 25–33.
6. Behrang Daryakenari, Shahrir Abdullah, Rozli Zulkifli, 2013, Reducing Vehicle Drag Force Through a Tapered Rear Side Wall, SAE International Journal of Commercial Vehicles, 6 (2): 582-588.
7. Daryakenari, B., Abdullah, S., Zulkifli, R., Sundararajan, E., Mohd Sood, A.B., 2013, Numerical study of flow over ahmed body and a road vehicle and the change in aerodynamic characteristics caused by rear spoiler, International Journal of Fluid Mechanics Research, 40 (4): 354-372.
8. Elwaleed Awad Khidira, Zambri Harun, Mohd Jailani Mohd Nor, Muhamad Razi, 2013, A Comparative Study of Sound Transmission Loss Provided by Glass, Acrylic and Polycarbonat, Jurnal Teknologi (Sciences & Engineering), 60 (2013) 1–4.
9. Hyder H. Balla, Shahrir Abdullah, Emad A. Jaffar Al-Mulla, Wan Mohd Faizal Wan Mahmood, Rozli Zulkifli, Kamaruzaman Sopian, 2013, Effect of Reynolds number on heat transfer and flow for multi-oxide nanofluids using numerical simulation, Research on Chemical Intermediates, (2013) 39:2197–2210.
10. Hyder H. Balla, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, M. Abdul Razzaq, Rozli Zulkifli, Kamaruzaman Sopian, 2013, Modelling and measuring the thermal conductivity of multi-metallic Zn/Cu nanofluid, Research on Chemical Intermediates, 39 (6):2801–2815.
11. Ismail, A.E., Ariffin, A.K., Abdullah, S., Ghazali, M.J, 2013, Stress intensity factors under mode III loadings, International Review of Mechanical Engineering, 7 (3): 578-582.
12. Jaharah A. Ghani, Haris Jamaluddin, Mohd Nizam Ab. Rahman, Baba Md. Deros, 2013, Philosophy of taguchi approach and method in design of experiment, Asian Journal of Scientific Research, 6 (1): 27-37.
13. K.A. Zakaria, S. Abdullah, M.J. Ghazali, 2013, Comparative study of fatigue life behaviour of AA6061 and AA7075 alloys under spectrum loadings, Materials and Design, 49 (2013) 48–57.
14. K.A. Zakaria, S. Abdullah, M.J. Ghazali, 2013, Elevated temperature fatigue life investigation of aluminium alloy based on the predicted S-N curve, Jurnal Teknologi (Sciences and Engineering), 63 (1): 75-79.
15. K.A. Zakaria, S. Abdullah, M.J. Ghazali, C.H. Azhari, 2013, Influence of spectrum loading sequences on fatigue life in a high-temperature environment, Engineering Failure Analysis, 30 (2013): 111–123.
16. M.H. Osman, Z.M. Nopiah, S. Abdullah, A. Lennie, 2013, Self-tuning varri method in preparing fatigue segment, Jurnal Teknologi (Sciences and Engineering), 63:2 (2013) 45–50.
17. M. Inoue; D.I. Pullin; Z. Harun; I. Marusic, 2013, LES of the adverse-pressure gradient turbulent boundary layer, International Journal of Heat and Fluid Flow, 44: 293-300.
18. M. Mohammad, S. Abdullah, N. Jamaluddin, O. Innayatullah, 2013, Acoustic Emission Evaluation of Fatigue Life Prediction for a Carbon Steel Specimen Using Statistical-Based Approach, Materials Testing, 55 (2013) 6.
19. M.F.M. Yunoh, S. Abdullah, Z.M. Nopiah, M.Z. Nuawi, 2013, A review of localised time-frequency features classification associated to fatigue data analysis, International Review of Mechanical Engineering, 7 (5), pp. 960-976.
20. M.J. Ghazali, N.I.I. Mansor, M.Z. Nuawi, J.A. Ghani, 2013, Facile wear failure monitoring of commercial bearing alloys using I-kaz method, Engineering Failure Analysis, 35, pp. 545-553.
21. M.M. Padzi, S. Abdullah, M.Z. Nuawi, 2013, Ultrasound Signals Response Associated to Fatigue Failure Behaviour using Statistical Analysis, Jurnal Teknologi (Sciences and Engineering), 5 (1): 35-38.
22. M.Z. Baharom, M.Z. Nuawi, G. Priyandoko, S.M. Harris, M.Z. Omar, 2013, Electromagnetic braking using eddy current resistance for stationary exercise bike, Advanced Science Letters, 19 (11): 3143-3147.
23. Mahfodzah Md Padzi, Shahrum Abdullah, Mohd Zaki Nuawi, 2013, Fatigue behaviour monitoring of an AISI 1045 carbon steel using the statistical-based Z-notched approach, Materials Testing, 55(2013) 5: 361-368.
24. Mahfodzah Md. Padzi, Shahrum Abdullah, Mohd Zaki Nuawi, 2013, Assessment of fatigue behaviour under different loading sequences using signal analysis approaches, Materials Testing, 55(2013) 3: 168-178.
25. Mohammad, M., Abdullah, S., Jamaludin, N., Innayatullah, O., Nopiah, Z.M., 2013, Fatigue Failure Assessment of Metallic Specimens Using the Acoustic Emission Technique, Materialpruefung/Materials Testing, 55(4): 310-318.
26. Mohd Nizam Ab Rahman, Wan Hasrulnizzam Wan Mahmood, Baba Md Deros, 2013, Increased productivity through improved manufacturing flexibility and time efficiency: A simulation study, Jurnal Teknologi (Sciences and Engineering), 62 (1): 53-61.
27. Mohd Radzi Abu Mansor and Masahiro Shioji, 2013, Characterization of Hydrogen Jet Development in an Argon Atmosphere, Zero Carbon Energy Kyoto.
28. Nagur Aziz Kamal Bashah, Norhamidi Muhamad, Baba Md Deros, Ahmad Zakaria, Shaharum Ashari, Achmed Mobin, Mohd Safuan Mohd Abdul Lazat, 2013, Multi-regression modeling for springback effect on automotive body in white stamped parts, Materials and Design, 46 (2013): 175-190.
29. Noor Faeizah Amat, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Norziha Yahaya, 2013, Suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing, Ceramics International.
30. Nuraini, A.A., Ihsan, A.K.A.M. Nor, M.J.M., Jamaluddin, N., 2013, Vibro-acoustic analysis of free piston engine structure using finite element and boundary element methods, Journal of Mechanical Science and Technology, 26 (8) (2012): 2405-2411.
31. Othman Inayatullah, Nordin Jamaludin, Mohd Jailani Mohd Nor, 2013, Application of acoustic emission technique to monitor the viscosity of single grade diesel engine lubricant oil, Advanced Science Letters, 19 (1): 216-220.
32. R. Daud, A.K. Ariffin and S. Abdullah , 2013, Validation of Crack Interaction Limit Model for Parallel Edge Cracks Using Two-Dimensional Finite Element Analysis, International Journal of Automotive and Mechanical Engineering, 7: 993-1004.
33. R.A. Eshkoor, S.A. Oshkovr, A.B. Sulong, R. Zulkifli, A.K. Ariffin, C.H. Azhari, 2013, Comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes, Materials and Design, 47 (2013): 248–257.
34. R.A. Eshkoor, S.A. Oshkovr, A.B. Sulong, R. Zulkifli, A.K. Ariffin, C.H. Azhari, 2013, Effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes, Composites Part B: Engineering, 55 (2013): 5–10.
35. Ratnam, M.J. Ghazali, R.J. Talib, C.H. Azhari, 2013, Effects of electron-beam and sulfur crosslinking of epoxidized natural rubber on the friction performance of semimetallic friction materials, Composites Part B: Engineering, 54 (2013): 377–382.
36. S. Abdullah, C.K.E. Nizwan, M.F.M. Yunoh, M.Z. Nuawi, Z.M. Nopiah, 2013, Fatigue features extraction of road load time data using the S-transform, International Journal of Automotive Technology, 14 (5): 805-815.
37. S. Huzni, Ilfan M., Sulaiman T., S. Fonna, M.Ridha and A.K. Arifin, 2013, Finite Element Modeling Of Delamination Process On Composite Laminate Using Cohesive Elements, International Journal of Automotive and Mechanical Engineering (IJAME), 7: 1023-1030.
38. S.A. Oshkovr, S.T. Taher, A.A. Oshkour, A.K. Ariffin, C.H. Azhari, 2013, Finite element modelling of axially crushed silk/epoxy composite square tubes, Composite Structures, 95, pp. 411-418.
39. S.M. Forghani, M.J. Ghazali, A. Muchtar, A.R. Daud, N.H.N. Yusoff, C.H. Azhari, 2013, Effects of plasma spray parameters on TiO2-coated mild steel using design of experiment (DoE) approach, Ceramics International, 39 (2013): 3121–3127.
40. Ude, A.U., Ariffin, A.K., Azhari, C.H., 2013, An Experimental Investigation on the Response of Woven Natural Silk Fiber/Epoxy Sandwich Composite Panels Under Low Velocity Impact, Fibers and Polymers, 14 (1): 127-132.
41. Y.S. Kong, M.Z. Omar, L.B. Chua, S. Abdullah, 2013, Explicit nonlinear finite element geometric analysis of parabolic leaf springs under various loads, The Scientific World Journal, 2013, art. no. 261926.
42. Z. Karim, M.Z. Nuawi, J.A. Ghani, E.A. Azrulhisham, S. Abdullah, 2013, Development of machining condition monitoring system using piezoelectric sensor analyzed by I-kaz multilevel method, World Applied Sciences Journal, 21 (2): 264-268.
43. Zambri Harun, Jason P. Monty, Romain Mathis dan Ivan Marusic, 2013, Pressure gradient effects on the large-scale structure of turbulent boundary layers, Journal of Fluid Mechanics, 715, pp. 477498.
44. Zhi Li, Min You, Gang-Yan Li, Jianping Wang, Rozli Zulkifli, 2013, Influencing factors on stress distribution of weldbonding joint under bending load, Journal of Applied Sciences, 13 (20): 4153-4157.
45. Zulkifli Mohd Nopiah, Ahmad Kadri Junoh, Ahmad Kamal Ariffin, 2013, Formulation of weighted goal programming using the data analysis approach for optimising vehicle acoustics levels, International Journal of Acoustics and Vibrations, 18 (3): 124-133.
46. Zulkifli Mohd Nopiah, Ahmad Kadri Junoh, Ahmad Kamal Ariffin, 2013, Noise annoyance fuzzy index in passenger car cabin, International Journal of Vehicle Noise and Vibration, 9 (3-4): 216-233.
47. Zulkifli Mohd Nopiah, Ahmad Kadri Junoh, Ahmad Kamal Ariffin, 2013, Optimisation of acoustical comfort in vehicle cabin using goal programming, International Journal of Vehicle Noise and Vibration, 9 (3-4): 194-215.