:: Conferences 2008

1. A. R. Ismail, M. R. A. Rani, Z. K. M. Makhbul, J.A. Ghani, M. Tahir and R. Zulkifli, 2008, “Optimum Solution of Environmental Factors Towards Productivity Improvement Using Taguchi Method”, Proceedings of Energy, Environment, Ecosystems And Sustainable Development (EEESD'08) , World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 11-13 June 2008, Algarve, Portugal.
2. Ahmad Rasdan Ismail, Azmi Hassan, Syamimi Syamsuddin, Mohd Zaki Nuawi,  Shahrum Abdullah And Hairunnisa Mohamad Ibrahim, 2008, The Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances, The Proceeding of International Conference on Robotics, Control And Manufacturing Technology (ROCOM '08),  World Scientific And Engineering Academy And Society (WSEAS), 6th-8th April 2008, World Trade Center Grand Hotel Zhejiang, Hangzhou, China.
3. Ahmad Rasdan Ismail, Sukarnur Che Abdullah, Juri Saedon, Wan Emri Wan Abdul Rahaman, 2008, Automotive Part Prototype Development Using Reverse Engineering Technology, The Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru, Malaysia.
4. Ahmad Rasdan Ismail, Mat Rebi Abdul Rani, Zafir Khan Mohamed Makhbul, Baba Md Deros, Mohd Nizam Ab Rahman and Mesran Rasan, 2008, Relationship Between Worker Posture And Factory Infrastructure: A Study At Malaysia Packaging Industry, The Proceeding of International Conference on Infrastructure Development (InCID 2008), 7th – 9th May 2008, Marriot Hotel, Putrajaya, Malaysia.
5. A.R. Ismail, M. Radzi A.M., M.J.M.Nor, M.Z.Nuawi, R. Zulkifli, K. Sopian, 2008, Noise Modeling Scenario from Industrial Projects in Malaysia, The Proceedings of International Conference on Energy, Environment, Ecosystems And Sustainable Development (EEESD'08), World Scientific And Engineering Academy and Society (WSEAS) International Conference 2008, 11-13 June 2008, Algarve, Portugal. Pp. 374 -379.
6. Baba Md Deros, Norani Nordin, Dzuraidah Abd Wahab and Mohd Shukri Saidin, 2008. A Study on Human Factor Issues and their Relationship with Employees Job Satisfaction in Manufacturing Industry, Proceedings of the 13th International Conference on ISO 9000 & TQM
7. Baba Md Deros, Lim Wai Yee, Ahmad Rasdan Ismail, Mohd Nizam Ab Rahman and Norani Nordin, 2008. A Study on Machine Capability and Efficiency using SPC, Proceedings of the 13th International Conference on ISO 9000 & TQM
8. Elmagrabi, N., Che-Haron, C.H., Jaharah, A.G. Gusri, A.I. Yanuar, B& Yasir, A. 2008. Recent trends on the cutting tool factors in machining ability appraisal. International Conference on Mechanical and Manufacturing Engineering, Universiti Tun Hussen  Onn, Johor, Malaysia. Paper ID# 0038, 21-23 May 2008. (It is published in the CD Proceeding)
9. Elmagrabi, N., Che-Haron, C.H., Jaharah, A.G. Gusri, A.I. Yanuar, B & Yasir, A., 2008. Dry Machining of Titanium Alloys and Its Impact on the Environmental and Tool Life. International Conference on Environmental Research and Technology ICERT 08, Universiti Sains Malaysia, Penang, Malaysia, pp. 773-777.
10. F. Lamin, M. Z. Nuawi, A. K. Soon, S. Abdullah, J. A. Ghani. 2008. A Novel Correlation Method for Machining Signals Denoising. Proceeding of International Conference On Mechanical And Manufacturing Engineering 2008 (ICME ’08). 21st – 23rd Mei 2008
11. Hernadewita, Mohd. Nizam Ab. Rahman and Baba Md Deros, 5-S and Total Quality Management Implementation, Proceeding of the 13th International Conference on ISO 9000 & TQM, ICIT 2008. 24-26th March 2008. Kuala Lumpur. pp. 57-59.
12. Jaharah A. G., Liang C. G., Siti Zaleha W., Che Hassan C.H., M.J. Ghazali, M.Z. Omar and B.M. Deros, 2008. The EWR of graphite and copper electrodes in electrical discharge machining (EDM) of AISI H13 harden steel, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru, Malaysia. ISBN: 97–98 –2963–59–2, pp 1-5.
13. J. Abu Qudeiri, H. Yamamoto and R. Rizauddin, 2008. Production Layout Design System by GA with One by One Encoding Method, Proceedings of The 13th International Symposium on Artificial Life and Robotics 2008(AROB 13th ’08), January 31-February 2, 2008, Oita Japan, pp. 316-319.
14. Khairur Rijal Jamaludin, Norhamidi Muhamad, Mohd Nizam Ab. Rahman, Sri Yulis M. Amin, Murthadahadi, Analysis of Variance on the Metal Injection Molding Parameters, Using a Bimodal Particle Size Distribution Feedstock, Int. Conference on Mechanical & Manufacturing Engineering (ICME2008), May 2008, Malaysia.
15. Khairur Rijal Jamaludin, Muhamad N., Rahman Ismail M. N., Amin S.Y.M., Murthadahadi, & Ismail M.H., Injection Molding Parameter Optimization Using the Taguchi Method for Highest Green Strength for Biomodal Powder Mixture with SS316L in PED and PMMA., 2008 World Congress on Powder Metallurgy & Particulate Materials, Jun 2008, Washington DC.
16. Mohd Nizam Ab Rahman, Kamaruzzaman Sopian, Ruhizan Mohd Yasin, Juhari Ab Razak, Rozli Zulkifli & Ahmad Rasdan Ismail, 2008. “Renewable Energy System in Remote Area and Suggestions for Effective Implementation”, World Renewable Energy Congress (WRECX), Glasgow, Scotland, 19-25th July 2008. pp. 2034-2038.
17. Mohd Nizam Ab Rahman, Nur Asyikin Abdullah & Nizaroyani Saibani, 2008. “Key Success Factors for Implementing Supply Chain: A comparison between UK and Malaysian Manufacturing Companies" UK-Malaysia Engineering Conference 2008, London, UK 14 to 15th July 2008. pp. 10.
18. M.Z. Nuawi, S. Abdullah, A.R.Ismail, M. K. Zakaria, F. Lamin and M. F. H. Hussin. 2008. Statistical Analysis On Ultrasonic Signals Measured On Automobile Engine Block, The Proceeding of Multimedia Systems & Signal Processing (MUSP '08), World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 6th-8th April 2008, World Trade Center Grand Hotel Zhejiang, Hangzhou, China.
19. Norhamidi Muhamad, Sufizar Ahmad, Andanastuti Muchtar, Jaafar Sahari & Khairur Rijal Jamaludin, Sintering effect for Titanium Foam Prepared by Slurry Method, 2008, 18th Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), Skovde, Sweden.
20. N. H. Elmagrabi, C. H. Che Haron, Jaharah A. Ghani,  Gusri A.I, Yasir, M.S  and Yanur, B., 2008. Recent Trends on the Cutting Tool Factors in Machinability Appraisal, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru, Malaysia. pp. 1-7.
21. R. Zulkifli, M.J.M. Nor, F. M. Tahir and A. R. Ismail, 2008. “Acoustic Properties of Sound Absorption Panel Using Multi-layer Coir Fibers, 13th International Conference on Applied Mechanics and Mechanical Engineering, 27th – 29th May 2008, Cairo, Egypt. pp. 92-98
22. Rizauddin Ramli, Hidehiko Yamamoto and Jaber Abu Qudeiri, 2008. Real-time Parts Input Control in Flexible Production System by Analogy, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21-23 May 2008, Johor Bahru, Malaysia.
23. Zaliha Wahid, Nuawi, M. Z., Abdullah, S., Jamaluddin, N., Haris, S. M. and Zakaria, M. K. 2008. Statistical Analysis on Ultrasonic Signals Measured On Proton Saga Engine Block under Different RPM: A Comparison, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008). AU-ID-0219. 21-23 Mei 2008. Johor Bahru, Malaysia
24. Sufizar Ahmad, Norhamidi Muhamad, Andanastuti Muchtar, Jaafar Sahari, Khairur Rijal Jamaludin & Mohd Halim Irwan Ibrahim. 2008. Sintering Effect for Titanium Foam Prepared by Slurry Method, Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, University of Skövde, Sweden, pp. 887-893.
25. S. Ahmad, N.Muhamad, A. Muchtar, J. Sahari, K. R. Jamaludin, M. H. I. Ibrahim, N. H. Mohamad Nor & I. Murtadhahadi. 2008. Production of Titanium Foam from Titanium Alloy (Al3Ti) Using the Slurry Method, Proceedings of the Third Brunei International Conference on Engineering and Technology, Brunei (CD).
26. RHEOLOGICAL INVESTIGATION OF WATER ATOMISED METAL INJECTION MOLDING (MIM) FEEDSTOCK FOR PROCESSBILITY PREDICTION, K. R. Jamaludin, N. Muhamad, M. N. Ab. Rahman, Murtadhahadi, S. Y. M. Amin, S. Ahmad, M. H. I. Ibrahim, N. H. M. Nor, International Conference Advances Material and Processing technologies, AMPT2008, Bahrain, October 2008. 
27. Norhamidi Muhamad, Hooman Algobashi, DEVELOPMENT OF A STARCH-BASED BINDER IN METAL INJECTION MOLDING, International Conference Advances Material and Processing technologies, AMPT2008, Bahrain, October 2008
28. Sri Yulis M. Amin, Norhamidi Muhamad, Shahrir Abdullah, Khairur Rijal Jamaludin, Application of RSM Technique to Optimize the Solvent Debinding Process For MIM Compact.  The Third Brunei International Conference on Engineering and Technology (BICET 2008).
29. K.R Jamaludin, N. Muhamad, M. N. Ab. Rahman, S. Y. M. Amin, S. Ahmad, M. H. I. Ibrahim, I. Murtadhahadi,N. H. M. Nor, The Influence of SS316L’s Particle Shape on the Injection Molding of a Composite Binder Feedstock (CAFEO 08, Bangkok Thailand) Nov 2008
30. Khairur Rijal Jamaludin, Norhamidi Muhamad, Mohd Nizam Ab. Rahman, Sri Yulis M. Amin, Murtadhahadi, Analysis of Variance on the Metal Injection molding parameters using a bimodal particle size distribution feedstock, Proceeding of International Conference of Mechanical and Manufacturing Engineering (ICME) 21-23 May 2008
31. Muhammad Hussain Ismail1,, Mohd Afian Omar, Norhamidi Muhamad, Istikamah Subuki, Khairul Rijal Jamaludin, Iain Todd and Hywel A. Davies Some Critical Assessments of Powder Characterization for Metal Injection Moulding (MIM) Process, Proceedings of  UK-Malaysia Engineering Conference (UK-MEC 2008)
32. A. R. Ismail, M. L  Yeo, M.H.M. Haniff, M.N.A. Rahman and M.R. A. Rani, 2008, Improving The Comfort Among The Assembly Operators: A Study at Malaysian Automotive Industry, Proceeding of 26th Conference of ASEAN Federation of Engineering Organization (CAFEO28), 29 – 29 November 2008, Sofitel Centera Grand Bangkok, Thailand.
33. A.R. Ismail, S.C. Abdullah, K.Sopian, S.Abdullah, M. M. Tahir, I.M.S. Usman and D.A.Wahab, 2008, RE In Modelling Of CNGDI Piston Head, Proceeding of the 7th International Conference on System Science and Simulation in Engineering (ICOSSSE'08), World Scientific And Engineering Academy And Society (WSEAS), 21 – 23 November 2008, Venice, Italy.
34. A.R. Ismail, S.C. Abdullah, A.H. A. A. Manap, K.Sopian, M. M. Tahir, I.M.S. Usman and D.A.Wahab, 2008, DFM and DFA Approach on Designing Pressure Vessel, Proceeding of the 7th International Conference on System Science and Simulation in Engineering (ICOSSSE'08), World Scientific And Engineering Academy And Society (WSEAS), 21 – 23 November 2008, Venice, Italy.
35. Ahmad Rasdan Ismail, Mohd Radzi Abu Mansor, Chew Bok Kim, Mazlan Md. Tahir, Ismar M.S. Usman, Kamaruzzaman Sopian, Mohd Nizam Ab Rahman, Abu Bakar Sulong and Baba Md.Deros, 2008, The Relation Between The Discomfort Level Of Malaysian Automotive Industries' Operators Towards Their Workstation Design And Work Environment, Proceeding of 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Holiday Inn, Surfers Paradise, Australia.
36. A. R. Ismail,M. R. A. Rani,Z. K. M. Makhbul, I.M.S.Usman,C. Meier, M.N.Ab.Rahman, K. Sopian, M. M. Tahir, 2008, Assessment of Environmental Factors at Automotive  Industry:A Case Study at Car Body Assembly Line , Proceeding of 2nd WSEAS/IASME International Conference on Energy Planning, Energy Saving, Environmental Education (EPESE'08),26-28 October 2008, Corfu Holiday Palace, Corfu Island,Greece,pp 76-82.
37. A. R. Ismail, S.Mat, N.Jusoh, M.N.Ab.Rahman, K. Sopian, I.M.S. Othman, M. M. Tahir, B.M.Deros, 2008, Indoor Thermal Comfort: A Study at Malaysian Automotive Industry, Proceeding of the 2nd International Conference on Waste Management, Water Pollution, Air Pollution, Indoor Climate (WWAI'08), 26-28 October 2008, Corfu Holiday Palace, Corfu Island,Greece, pp. 175-181.
38. A.Rasdan Ismail, O. Peng Chong, M.J.M Nor,  J.Abdul Ghani, M.N. Ab.Rahman, R.Zulkifli, B.M.Deros, 2008, Simulation of Capacity Output for Filling Process: A Study at Malaysian SME, Proceeding of 13th International Conference on Machine Design and Production (UMTIK2008), 3-5 September 2008, Askeri Muze, Istanbul, Turkeye.
39. Lily Amelia, Dzuraidah Abd. Wahab, Che Hassan Che Haron and  Che Husna Azhari. 2008. The Application of Artificial Intelligence in Optimisation of Automotive Components for Reuse, 9th Global Congress on Manufacturing and Management, 12-14 Nov 2008, Gold Coast, Australia. 
40. Lily Amelia, Dzuraidah Abd. Wahab and Azmi Hassan. 2008. The Application of Hybrid Artificial Intelligence Techniques in the Optimisation of Crude Palm Oil Production. 3rd International Symposium on Information Technology, 26 - 29 August 2008, pp 215-222, Kuala Lumpur
41. Muhammad Marsudi, Dzuraidah Abdul Wahab and Che Hassan Che Haron, Development of a product design support tool using manufacturing cycle time, 38th International Conference on Computers and Industrial Engineering, 31 Oct-2 Nov 2008 Beijing.