Articles with Impact Factors

• T.F. Go, D.A. Wahab, M.N.Ab. Rahman R. Ramli, A. Hussain, Genetically optimised disassembly sequence for automotive component reuse, Journal of Expert Systems with Application.(IF 1.924)
• R. Ramli, D. A.Wahab, J.A.Ghani and R.M. Zain, A comparison of lifted lead defect inspection system for surface mount technology, Journal of Scientific and Industrial Research.(IF 0.587)
• Jaharah A. Ghani, Poh Siang Jye, Che Hassan CheHaron, Muhammad Rizal, MohdZakiNuawi, Determination of sensor location for cutting tool deflection using finite element method simulation, Journal of Mechanical Engineering Science (IF 0.473)
• AminahIshak, Jaharah A. Ghani, danChe Hassan CheHaron , KajianFaktor Yang Mempengaruhi Daya dan Taburan Tegasan Semasa Pemesinan FCD 500 Menggunakan Kaedah Unsur Terhingga, Sains Malaysiana, 41(12)(2012): 1605–1612 (IF 0.268)
• Jaharah A. Ghani, Yeong Shoot Kian, Stephanie Tan Chia Ven, ZahiraYaakob, and Che Hassan CheHaron, Performance of Biodegradable Palm Oil Coolant in Machining Process Journal of Biobased Materials and Bioenergy, 6: 1–4.(IF 1.023)

Articles in Indexed Journals (ISI WoS / SCOPUS / ERA)

• Ahmad Rasdan Ismail, Shashi Kumar S A Karagaratnan, RozliZulkifli, Baba MdDeros, Mohd Nizam Abdul Rahman, A Review on Thermal Comfort Assessment in Malaysian Industries, Jurna lTeknologi.
• 2- NorashikinRahman, Baba Md. Deros, Mohd. NizamAbRahman, A Study on Benchmarking Technique Understanding and Knowledge in Malaysia Palm Oil Milling Industry, Jurnal Teknologi
• Noor Hidayah Abu, Baba MdDeros, DzuraidahAbdWahab, MohdNizamAbRahman, NoraniNordin, A Study on the Difference Between Radical Innovation and Incremental Improvement in Pre-Development Practices of NPD Projects, Jurnal Teknologi
• Fatimah Mahmud, Baba MdDeros, Dzuraidah Abdul Wahab, MohdNizamAbRahman, A Survey on the Barriers of Benchmarking Implementation in Malaysia Oil Palm Industry, Jurnal Teknologi
• Baba MohdDeros, Tan Jun, MohdNizamAbdRahman, Benchmarking Technique in Lean Manufacturing (5s) Practice, Jurnal, Teknologi
• Nordin N., MdDeros B., Wahab D.A., Ab. Rahman M.N , Validation of Lean Manufacturing Implementation Framework Using Delphi Technique, JurnalTeknologi
• MohdFirdausMahamad Ali, Baba Md. Deros, Ahmad Rasdan Ismail, Biomechanics Analysis for Dominant Leg During Instep Kicking, Jurnal Teknologi
• Nordin N., MdDeros B., Wahab D.A., Ab. Rahman M.N, A framework for organisational change management in lean manufacturing implementation, International Journal of Services and Operations Management
• Noor Hidayah Abu, Baba MdDeros, DzuraidahAbdWahab, MohdNizamAbRahman, MohdFitriMansor, The Pre-Development Process Implementation of Product Innovation: A Malaysian Food and Beverage Manufacturing SMEs Survey, International Journal of Business & Management Science
• Baba MdDeros, Suzana Mohammed Zohdi, DarlianaMohamad, Nor KamalianaKhamis&NizaroyaniSaibani , An Employer Survey on Industrial Sector Involvement in Malaysian National Dual Training System, Asian Social Science
• E.A. Azrulhisham, D.A. Wahab, S. Abdullah, N. Nikabdullah, C.H. Che Haron, Inverse Power Law Model for Extrapolation of Fatigue Life Curves, International Review of Mechanical Engineering.
• Nurazua Mohd Yusop, Dzuraidah Abdul Wahab, NizaroyaniSaibani, Analysis of Remanufacturing Practices in the Malaysian Automotive Industry, JurnalTeknologi
• Nor Kamaliana Khamis, Abu Bakar Sulong, Baba Md Deros, A Case Study on Peer Review and Lecturer Evaluations in an Academic Setting, A sian Social Science
• Nor Kamaliana Khamis, Baba Md Deros, Nizaroyani Saibani, Syamsinar Baizura Ahmad Sabki, Application of a Computer Based System for Statistical Process Control in a Semiconductor Company: A Case Study, JurnalTeknologi.
• N.K. Khamis, M.Z. Nuawi, S. Abdullah, Z.M. Nopiah, L. Abdullah, Signal Analysis Software as an Educational Tool for Engine Diagnostic System, International Review of Mechanical Engineering.
• S.M. Jainury, R. Ramli, M.N.A. Rahman and A.Omar, An Implementation of Set Parts Supply System in the Malaysian Automotive Industry, JurnalTeknologi.
• R. Ramli, R. Ahmad and J.A. Ghani , Kerf Width Optimization in Wire-Cut Electrical Discharge Machine by using Taguchi Method, JurnalTeknologi.
• Nor Khairusshima M.K., Che Hassan C.H., Jaharah A. G., Nurul Amin AKM, Tool Wear And Surface Roughness On Milling Carbon Fiber-Reinforced Plastic Using Chilled Air, Journal of Asian Scientific Research 2(11):593-598.
• M.A. Sulaiman, C.H. CheHaron, J.A. Ghani, M.S. Kasim, The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy Journal of Applied Sciences Research, 8(9): 4821-4827, ISSN 1819-544X.
• Musfirah A.H, Jaharah A.G, Magnesium and Aluminum Alloys in Automotive Industry, Journal of Applied Sciences Research, 8(9): 4865-4875, ISSN 1819-544X.
• R. Natasha, J.A. Ghani, C.H.C. Haron, J. Syarif, The Effect of Cryogenic Application on Surface Integrity in Manufacturing Process: A Review, Journal of Applied Sciences Research, 8(9): 4880-4890, ISSN 1819-544X.
• Jaharah A. Ghani, Poh Siang Jye, Che Hassan CheHaron, Muhammad Rizal, MohdZakiNuawi, Relationship Between Measurement of Cutting Force and Sensor Location in Turning Process JurnalTeknologi, 59 91–94.
• Siow Ping Chuan, Jaharah A. Ghani, SitiHaryaniTomadi and Che Hassan Che Hassan, Analysis of Ti-base hard coating performance in machining process: a review Journal of Applied Science, Volume 12, Issue 8, pp.1882-1890
• Salah Al-Zubaidi, JaharahA.Ghani, and Che Hassan CheHaron, Application of Artificial Neural Networks in Prediction Tool Life of PVD Coated Carbide When End Milling of Ti6Al4v Alloy Journal of Mechanics, ISSN 3199-84448, Issue 3, Volume 6, pp 179-186
• Jaharah A. Ghani, Muhammad Rizal, MohdZakiNuawi, Che Hassan CheHaron, Development of an Adequate Online Tool Wear Monitoring System in Turning Process using Low Cost Sensor, Advanced Science Letters. Volume 13, Number 1, June pp. 702-706(5)
• MohdNizamAbRahman et al., Barriers to Implement Lean Manufacturing in Malaysian Automotive Industry, JurnalTeknologi (Sciences & Engineering)
• MohdNizamAbRahman et al. , Green Supply Chain Management in Malaysian Aero Composite Industry, JurnalTeknologi (Sciences & Engineering.
• MohdNizamAbRahman et al., Internet marketing strategy for Malaysia medical practitioners, Journal of Medical Marketing.
• MohdNizamAbRahman et al., The Effective Implementation of Global Supply Chain Management in Small to Medium-sized Companies in Malaysia: An Empirical Study International Journal of Management.
• MohdNizamAbRahman et al., Planning Production and Control: Design of Experiments (DOE) in Legal Service Industry Research Journal of Applied Sciences, Engineering and Technology
• MohdNizamAbRahman et al., Forecasting Capabilities of Spare Part Production with Artificial Neural Networks Model in a Supply Chain ,World Applied Sciences Journal
• MohdNizamAbRahman et al., Optimization of Supply Chain Management Based on Response Surface Methodology: A Case Study of Iran Khodro World Applied Sciences Journal
• MohdNizamAbRahman et al. , Internet marketing strategy for Malaysia medical practitioners Journal of Medical Marketing